Date: 26-March-2012(Rev) Page 3/4
Rev: 1-Dec-2015
4. To Attach Long Side Rails (D) to the assembled piece, insert the wooden dowels on the ends of the
Cross Bars (C) into the pre-drilled holes on the Long Side Rails (D), as shown below. Press firmly to
ensure the Left and Right Bottom Boards (A) sit in the slots of the Long Side Rails (D).
5.
Slide a Spring Washer (H) and a Flat Washer (I) onto each Bolt (G). Align the predrilled holes on the
Short Side Rails (E) to the wooden dowels on ends of the (2) Long Side Rails (D). Insert the bolt with
washers into pre-drilled hole on the Short Side Rail (E). Place Barrel Nut (J) in the corresponding
opening on the Long Side Rail and use Allen Key (F) to connect, as shown below. Repeat with the
remaining (7) bolts. Do not fully tighten the bolts.
G
(8x)
A.
A.
