pottery barn kids UNIVERSAL TRUNDLE Assembly Manual Download

Page: 4 / 4

Date: 26-March-2012(Rev) Page 4/4
Rev: 1-Dec-2015

6. Secure Bottom Boards with the Long/Short Side Rails by inserting the remaining (10) Long Wood

Screws (K) into pre-drilled holes on wooden cleats and tighten with a Philips Head Screwdriver as shown.

7. Attach the (6) Casters (M) to pre-drilled holes on the Bottom Boards using (24) Short Wood Screws (L)

and tighten with a Philips Head Screw Driver. Check alignments and tighten all connecting bolts.

CARE INSTRUCTIONS:



Dust often using a clean, soft, dry lint-free cloth.



Blot spills immediately, and wipe with a clean, damp, cloth.



We do not recommend the use of chemical cleansers, abrasives, or furniture polish on our lacquered

finish.

Thank you for your purchase.

stores | catalog | www.potterybarnkids.com

USA 1.800.290.8181

(10x)

(24x)

Summary of Contents for UNIVERSAL TRUNDLE

Page 1: ...of any contents until assembly is completed to avoid accidentally discarding small parts or hardware Use the parts and hardware lists to identify and separate each of the pieces included prior to star...

Page 2: ...e with trundle 2 Lay the Left and Right Bottom Boards A on either side of the Center Bottom Board B with the pre drilled holes facing up as shown below 3 Attach 2 Cross Bars C to the bottom boards by...

Page 3: ...sit in the slots of the Long Side Rails D 5 Slide a Spring Washer H and a Flat Washer I onto each Bolt G Align the predrilled holes on the Short Side Rails E to the wooden dowels on ends of the 2 Lon...

Page 4: ...holes on the Bottom Boards using 24 Short Wood Screws L and tighten with a Philips Head Screw Driver Check alignments and tighten all connecting bolts CARE INSTRUCTIONS Dust often using a clean soft d...