1 of 2
Mason Medicine Cabinet – Wall Mount
Assembly Instructions
Please read all instructions before beginning assembly.
For your safety and convenience, assembly by two people is recommended.
Use the parts and hardware lists to identify and separate each of the components included.
Save all packing materials until assembly is complete to avoid the accidental discarding of smaller parts or
hardware
PARTS:
1 – Cabinet – (1 x)
2 – French Cleat (1 x)
3 –Glass Shelf (3 x)
HARDWARE:
A –Toggle(Dia.1/2
”
x 2 1/2
”
) – (2 x ) B –Toggle screw(Dia.1/8
”
x 2 1/4
”
) - ( 2 x) C – Screw(Dia.1/8” x 2”) - ( 2x )
D –Anchor(Dia.1/2” x 1 1/4”) – (1x) E – Anchor screw (Dia.1/8” x 1 1/4” - (1x) F – Shelf pin - (12x)
TOOLS NEEDED: (not included)
Phillips screwdriver
ASSEMBLY INSTRUCTIONS:
Attention:
For safe mounting of this product, it is important to use the proper hardware for your wall type. The
hardware included here is meant for drywall mounting only. If your walls are made from concrete, brick or plaster,
please consult your local hardware store for assistance in selecting the appropriate hardware.
1.
Determine the desired height of the cabinet, measure the position of French Cleat “2”, use a pencil to mark the
wall through the pre-drilled holes on the ends of French Cleat “2”, this mark is the insertion points for the
mounting hardware. (See
Fig.1
)
Fig.1
1
3
2
