- 15 -
1301-GB EINSATZ 3784
GB
OPERATION
Important notes prior to the start of work
Safety hints:
See Attachment A, 1. - 7.)
After the first hours of operation
• Retighten all screw connections.
Safety advice
1. Check
- Check the condition of knives and the knife holder.
- Check cutting discs for damage (see chapter
"Maintenance").
2. Only switch the implement on in working
position and do not exceed the specified pto
speed (max. 1,000 rpm)!
An illustration, which is located near the gear, advises
which p.t.o. speed your mower unit is equipped for.
• Only switch on the p.t.o. if all the safety devices (covers,
protective aprons, panels etc.) are in proper condition .
3. Pay attention to correct p.t.o.
direction of rotation!
4. Avoid any damage!
• The area to be mowed must be free of
obstructions or foreign objects. Such
objects (e.g. large stones, pieces of wood,
boundary stones, etc.) can damage the
mower unit.
In the event of a collision
• Stop immediately and switch off the drive.
• Carefully check the implement for damage. The mowing
discs and their drive shaft (4a) must be checked in
particular.
• Have the implement checked also by a specialist
workshop if necessary.
After contact with a foreign object
• Check the condition of knives and the knife holder (see
chapter "Maintenance and service").
• Retighten all blade screw connections.
5. Remain at a distance when the engine is
running.
- Keep people out of the danger zone - foreign bodies which
can be ejected by
the mower could
injure them.
Special care is
n e c e s s a r y o n
stony ground and
near roads and
paths.
6. Wear hearing protection
The noise level in the workplace can
deviate from the measured value (see
Technical Data) partly because of the
differing cabin types of various tractors.
• If a noise level of 85 dB (A) is reached or exceeded,
the farmer must have suitable hearing protection in
readiness (UVV 1.1 §2).
• If a noise level of 90 dB (A) is reached or exceeded,
the hearing protection must be worn (UVV 1.1 § 16).
01-00-10
4a
5 4 0 U p m
1 0 0 0 U p m
bsb 447 410
TD8/95/6
