- 16 -
1301-GB EINSATZ 3784
OPERATION
GB
Mowing
1. Adjust the cutting height by turning the upper
link spindle and with the hydraulic upper link
(max. 5° inclination to mower discs)
2. To mow, slowly engage the pto outside the
mowed fodder (in field transport position) and
take the mower rotor to full speed.
Smoothly increase the p.t.o. speed, in order to avoid
noises in the free-wheel conditioned by the system.
- Adjust travel speed to terrain and crop.
Reversing
Raise the mower when reversing!
Settings for operation
Tractor hydraulic system
- The right lower link is to be set to H1 ≈ 700 mm ground
distance.
- Fix the tractor hydraulic system in this position
Headstock
Set the headstock horizontal. Changes can be performed
with the hydraulic lower link compensator.
1. Set 3-way cock at headstock downwards to select
the function "Hydraulic lower link".
2. Activate the dual-action control unit at the tractor
until the attachment frame is horizontal.
Lift-out cylinder
- The lift-out cylinder control unit is to be switched to
floating position during use to achieve correct adjustment
to soil
Protective covers
- All protective covers are to be kept closed and in good
condition
Protective covers
The side guard and front guard can be folded up for cleaning
and maintenance work.
The two foldable guards lock mechanically in closed
condition. A tool (e.g. screwdriver) is required to open them.
Be
advised!
All the protective devices must be in the
positions intended during use!
Any damaged covers are to be replaced
before use!
700 mm
