Possible settings
When delivered, the roller conditioner is preset for medium
intensity. Make the following adjustments for optimum
adaptation to the surrounding conditions:
Distance between rollers: (A)
The distance between the rollers is equally set, left and right,
using the adjustment screw (1). Basic setting: (X) = 70 mm.
1
X
Because of component tolerances an
uneven roller gap can occur despite basic
setting. Check and unilaterally adjust the
adjustment screw (1) if necessary.
Conditioner intensity (A):
The upper roller is moveable and is tensioned left and
right with a spring. The spring tension intensity is always
adjusted using nut (A).
Standard setting (SE): 210 mm
A
SE
Set swath width: B
The swath boards form the cut and conditioned fodder into
the desired swath width. Adjusting the swath board (C) is
carried out identically, left and right, by unscrewing and
adjusting the adjusting screw (B).
B
- 24 -
1700-GB_ROLLER CONDITIONER_3783
ROLLER CONDITIONER
GB
