GB
- 41 -
1400_GB-SICHTKONTROLLE_3776
MAINTENANCE
Wear control cutting blades bracket
Be advised!
There is danger of accidents if:
- the blade pin in the middle is worn
off up to 15 mm
- the wear area (30a) has reached the
edge of the hole.
- the lower blade pin (30b) is worn off
- the blade pin is no longer stable in
position
If you find one or several wear signs,
do not continue mowing.
Worn off parts are to be replaced
with new Pöttinger original parts
immediately.
Blade pins and nuts shall be fastened
with 120 Nm.
Check the cutting blades suspension
for wear and other damages:
• Before every putting into operation.
• More frequently during operation.
• Immediately after driving over a solid obstacle (e.g.
stone, wood piece, metal …).
• If you hear grinding noises from the cutter bar
Be advised!
Danger of accident
if wear parts are
worn off.
Such worn off wear
parts may not be
used further.
Otherwise there is
accident hazard
due to fling-off
pieces (e.g.
cutting blades,
fragments of
parts. . .).
The following parts are subject to
wear:
• Cutting blade brackets (30)
• Cutting blades pins (31)
Procedure - Visual control
1. Remove the cutting blades.
2. Remove the feed residues and dirt
- around the pin (31).
