0900_GB-Select Control_3843
- 19 -
SELECT CONTROL
GB
Manual Mowing Operation:
If necessary, it is also possible to operate without automatic pre-selection; the pre-selected function is carried out using the control
device.
+
Using the tractor’s control unit, both mowing units are swung between the “Field transport” and
“Working position” position.
(
)
Using the tractor’s control device, only one mowing unit is swung between the ”Field transport"
and “Working position" position. The second mowing unit remains in the home position.
+
Using the tractor’s control unit, the transport lock is opened or closed manually.
Swinging from the “Field transport" to the "Road transport” position:
Requirement for this function: Standstill of the PTO drive shaft and working position of both mowing units!
+
+
Pre-select “Road transport" button -> both mowing units are activated (pre-select relevant mowing
unit for individual lifting)
Keep “Road transport" button pressed and operate the tractor’s control device, until the “Road
transport” position is reached and the mechanical transport lock has engaged.
Caution!
Danger of tipping if swinging is carried out on a slope!
For
safety reasons the mowing units must be swung into road transport position by means of individual lifting!
Always swing the downhill side mower unit first and only then may the uphill side mower unit be swung into road
transport position.
Swinging from the “Road transport" to the “Field transport” position:
+
->
Pre-select “Road transport" button, keep “Transport lock” button pressed and operate the tractor’s
control device, until the mechanical transport lock has disengaged.
Keep “Road transport" button pressed and switch the tractor’s control device to the floating position
until the “Field transport” position is reached.
When
the “Field transport position” has been reached, a switchover back to automatic operation
takes place after a short time and both mowing units are de-selected.
Caution!
Danger of tipping if swinging is carried out on a slope!
For safety reasons the mowing units must be pivoted into field transport position by means of individual lifting!
Always swing the uphill side mower unit first and only then may the downhill side mower unit be swung into field
transport position!
