0900-GB USE_3843
- 34 -
GB
OPERATION
1. Checking the knives
- Check the condition of knives and the knife holder.
- Check cutting drums for damage (see also chapter
"Maintenance").
2. Protective devices
- Fold down side protection in “Select Control” version
or check activated side protection in “Power Control”
version.
- Check safety equipment (covers, protective skirts,
panels, etc,) for proper condition and function.
3. Switch-on the machine only in working position
and do not exceed the prescribed power take-
off speed (max. 1000 rpm).
- Turn the p.t.o. on only when all safety devices (coverings,
protective aprons, casings, etc.) are in proper condition
and attached to the implement in the correct protective
positions.
4.
Pay attention to correct p.t.o.
direction of rotation!
5. Damage protection!
The surface to be mowed must be free
of obstructions or foreign objects. Such
objects (e.g. large stones, pieces of wood,
boundary stones, etc.) can damage the
mower unit.
In the event of a collision
• Stop immediately and switch off the drive.
• Carefully check the implement for damage. The
mowing discs and their drive shaft must be checked
in particulare.
• Have the implement checked also by a specialist
workshop if necessary.
After any contact with foreign objects
• Check the condition of knives and the knife holder (see
chapter "Maintenance and service").
• Retighten all knife screw fittings.
TD8/95/6a
01-00-10
4a
Safety
hints:
see supplement-A1
points 1. - 7.)
Attention!
After the first hours
of operation
• Retighten all kni-
fe screw fittings.
Important points before starting work
6. Stay clear while engine is running.
- Keep people out of the danger zone - foreign bodies
which can be ejected by the mower could injure
them.
Special care is necessary on or near stony ground.
7.
Wear hearing protection
If a noise level of 90 dB (A) is reached
or exceeded, the hearing protection
must be worn.
bsb 447 410
