Maintenance
Correct belt tension:
Check dimension X2
NOVACAT X8:
X2 = 185 mm (lateral mower units)
Caution!
Switch off the engi-
ne before carrying
out maintenance
and repair work
and remove the
ignition key.
Position of rotor tines
Item Z1:
Position of rotor tines for normal conditions
of use.
Item Z2:
For difficult conditions such as if the fodder
wraps around the rotor.
Rotate the rotor tines through 180° (pos. Z2). This tine
position gets rid of the problem in most cases. However,
this reduces the processing effect somewhat.
Removal and installation of the conditioner
The mower unit is compatible for optional hitching of a tine conditioner, roller conditioner or swath former. Special work
steps are necessary for the conversion depending on the attachment unit.
For details see the Section “REPLACE CONDITIONER”
X2
- 42 -
0900-GB_ZINKENAUFBEREITER_3843
TINE CONDITIONER
GB
