Operation
The roller conditioner is suitable for lucerne and clover types. Two driven intermeshing rollers crush the fodder. This
damages the plant’s natural wax coating and the drying time is accelerated.
Warning!
Rotating compo-
nents, danger of
catching. Never
open or remove
protection de-
vices when the
motor is running.
Safety tip:
Before initial
operation read
and observe the
operator’s manu-
al, especially the
safety tips.
Designations:
(1)
Central lubricating unit (on lighting carrier)
(4) Upper and lower rubber roller
(2)
Adjusting unit for swath board (left and right)
(5) Maintenance unit: belt drive
(3)
Maintenance unit: chain drive
Adjustment possibilities
When delivered the roller conditioner is preset for medium
intensity. For optimum adaptation to the surrounding
conditions the following adjustments can be made:
Distance of rollers from each other:
The roller gap is set identically on the left and right side
with the adjusting screw (1). base setting: (X) = 70 mm.
By reason of component tolerances an
uneven roller gap can occur despite the
base setting. Check and if needed reset
the adjusting screw (1) on one side.
1
2
3
4
5
278-09-45a
1
X
- 43 -
1000-GB_WALZENAUFBEREITER_3843
GB
ROLLER CONDITIONER