manualshive.com logo in svg

Poulan Pro 187009, Owner'S Manual

The Poulan Pro 187009 Owner's Manual is an essential guide for operating and maintaining your Poulan Pro product. Easily download this manual for free from our website, providing you with detailed instructions and helpful tips to ensure optimal performance and longevity of your equipment. Visit 88.208.23.73:8080 to download now.

Share
Download
background image

35

KEY    PART
NO.     NO.                DESCRIPTION

KEY    PART            
NO.     NO.                DESCRIPTION

NOTE:

All component dimensions give in U.S. inches.
1 inch = 25.4 mm

REPAIR PARTS

TRACTOR - MODEL NUMBER PD20PH48STC

DRIVE

1          - - - - - -         Transaxle (Order parts from trans-

axle manufacturer)  

 

Hydro gear Model 336-0510

6         17060512       Screw 5/16-18 x 3/4
9         179334           Clutch Elec 
15       74490544       Bolt Hex Flghd 5/16-18 Gr. 5
16       73800500       Nut Lock Hex W/Ins. 5/16-18 Unc
17       126197X        Washer 1-1/2 OD x 15/32 ID x  

.250

19       73800600       Nut Lock Hex W/Wsh  3/8-16 Unc
20       173937           Bolt Hex 7/16-20 x 4 x Gr. 5-1.5
21       175036X421  Knob Custom Control Cruise
22       175896           Rod, Brake 
24       73350600       Nut, Hex Jam  3/8-16 Unc
25       106888X        Spring, Brake Rod
26       19131316       Washer
27       76020412       Pin Cotter  1/8 x 3/4 CAD.
28       175765           Rod, Parking Brake
29       71673             Cap, Brake, Park
30       169592           Bracket, Transaxle
32       74760512       Bolt Hex Hd  5/16-18 Unc x 3/4
33       72140506       Bolt Rdhd Sqnk 5/16-18 Unc x 3/4
34       175578           Shaft, Foot Pedal
35       120183X        Bearing, Nylon
36       19211616       Washer
37       1572H            Pin, Roll
38       179114           Pulley, Composite, Flat
39       74760648       Bolt Fin Hex 3/8-16 Unc x 3
41       175556           Keeper, Belt Idler Flat
47       127783           Pulley, Idler, V-Groove
48       154407           Bellcrank Clutch Grnd Drw Stl
49       123205X        Retainer, Belt
50       72110612       Bolt
51       73680600       Nut Crownlock  3/8-16 Unc
52       73680500       Nut, Crownlock  5/16-18 Unc
53       105710X        Link, Clutch
55       105709X        Spring, Return, Clutch
57       140294           V-Belt, Ground Drive
59       169691           Keeper, Center Span
61       17120614       Screw 3/8-16 x .875  
62       8883R            Cover, Pedal
63       174607           Pulley, Engine
65       10040700       Washer
66       154778           Keeper Belt Engine
74       137057           Spacer, Axle
75       121749X        Washer  25/32 x 1-1/4 x 16 Ga.
76       12000001       E-Ring
77       123583X        Key, Square
78       121748X        Washer  25/32 x 1-5/8 x 16 Ga.

89       174901X428  Console, Shift
90       124346X        Nut Self-Thd Wsh-hd  1/4 Zinc
95       180825           Rod Bypass 
96       4497H            Retainer Spring 1" Zinc/Cad
116     72140608       Bolt RDHD SQNK 3/8-16 Unc x 1
120     73900600       Nut Lock Flg 3/8-16 Unc
150     175456           Spacer Retainer
151     19133210       Washer 13/32 x 2 x 10 Ga.
202     72110614       Bolt Carr Sh 3/8-16 x 1-3/4 Gr. 5
207     17670508       Screw Thdrol 5/16-18 x 1/2
212     145212           Nut HexFlange Lock
213     17060620       Screw 3/8-16 x 1-1/4
214     174735           Link Transaxle
217     179433           Pedal Assy, Reverse, with Pad
218     174713           Arm Control Pedal Reverse
219     174839           Bracket Frest Pdl Ctrl. Hyd
220     174711           Bracket Mtg. Pedal Control
221     72140606       Bolt Rdhd Sqnk 3/8-16 Unc x 3/4
222     73680700       Nut Crownlock 7/16-14 Unc
223     174840           Washer Nylon 11/16 ID x .060
224     174736           Pedal Forward
225     174712           Arm Control Pedal Forward
226     174902           Bolt Pivot Spacer
227     174710           Cam Reverse Pedal LT
228     179032           Bolt Shoulder 5/16-18
229     176451           Washer Serrated 5/16 x .75
231     174573           Strap Torque
232     175570           Actuator Cruise Disengage
233     174856           Pawl Control Cruise
234     174858           Lever Control Cruise
235     174857           Sector Control Cruise
236     128903           Bolt Shoulder 3/8-16 Unc 1/44
237     170165           Bolt Shoulder 5/16-18
238     175807           Arm Mtg. Cruise Sector
239     17490508       Screw Thdrol 5/16 x 1/2
240     175610           Spring Return Cruise Control
241     73930400       Nut Centerlock 1/4-20 Unc
242     74780412       Bolt Fin Hex 1/4-20 Unc x .75
243     178289           Bracket Anti-Rotation CVX
244     166880           Screw 5/16-18 x 5/8
250     17060612       Screw 3/8-16 x .75
253     179422           Washer .3125 x .615 x 16 Ga.
254     178062           Clip Retainer
272    

17670508

      Screw, 5/16-18 x 1/2 TT

273    

179610

          Pad, Reverse Pedal

274     175646           Cover Pedal Forward

Summary of Contents for 187009

















































Reviews:

No comments

Related manuals for 187009

Woods 872298G Operator'S Manual preview
872298G
Brand: Woods Pages: 76
AL-KO 34.8 Li Translation Of The Original Instructions For Use preview
34.8 Li
Brand: AL-KO Pages: 304
Talex Mini Mini 1,35 Z 079 Instruction Manual preview
Mini Mini 1,35 Z 079
Brand: Talex Pages: 41
Deutz-Allis 608 - 611 Operator'S Manual preview
608 - 611
Brand: Deutz-Allis Pages: 36
TALEN TOOLS AVR HGM30 Manual preview
AVR HGM30
Brand: TALEN TOOLS Pages: 16
VITO GARDEN VIMR5C Instruction Manual preview
VIMR5C
Brand: VITO GARDEN Pages: 66
Grizzly BRM 46-160 HA Translation Of The Original Instructions For Use preview
BRM 46-160 HA
Brand: Grizzly Pages: 160
Grizzly BRM 46-141 A-OHV Translation Of The Original Instructions For Use preview
BRM 46-141 A-OHV
Brand: Grizzly Pages: 172
Einhell Royal 34.010.61 Assembly And Operating Instructions Manual preview
34.010.61
Brand: Einhell Royal Pages: 84
Jonsered FR 2113 A Operator'S Manual preview
FR 2113 A
Brand: Jonsered Pages: 56
Wolf Garten A 5300 A Original Operating Instructions preview
A 5300 A
Brand: Wolf Garten Pages: 289
Simplicity 17GTH-L48 Operator'S Manual preview
17GTH-L48
Brand: Simplicity Pages: 56
Toro 73547 Setup Instructions preview
73547
Brand: Toro Pages: 8
Kobalt KMP 2040-06 Manual preview
KMP 2040-06
Brand: Kobalt Pages: 24
Toro 78370 Operator'S Manual preview
78370
Brand: Toro Pages: 24
Toro 78218 Operator'S Manual preview
78218
Brand: Toro Pages: 24
Toro 78216 Operator'S Manual preview
78216
Brand: Toro Pages: 24
Toro 75744 Operator'S Manual preview
75744
Brand: Toro Pages: 52

Brands by name

Popular brands

Load more brands