background image

5

SAFETY RULES

•   Be sure the area is clear of other people 

before mowing. Stop machine if anyone 
enters the area.

•   Never carry passengers or children 

even with the blades off.

•   Do not mow in reverse unless ab so -

lute ly necessary. Al ways look down and 
behind before and while backing.

•   Never carry children. They may fall off 

and be seriously injured or interfere with 
safe machine operation.

•   Keep children out of the mowing area 

and under the watchful care of another 
responsible adult.

•   Be alert and turn machine off if children 

enter the area.

•   Before and when backing, look behind 

and down for small children.

•   Mow up and down slopes (15° Max), not 

across.

•   Remove obstacles such as rocks, tree 

limbs, etc.

•   Watch for holes, ruts, or bumps. Uneven 

terrain could overturn the machine. Tall 
grass can hide obstacles.

•   Use slow speed. Choose a low gear 

so that you will not have to stop or shift 
while on the slope.

•   Avoid starting or stopping on a slope. If 

tires lose traction, disengage the blades 
and proceed slowly straight down the 
slope.

•   If machine stops while going uphill, 

disengage blades, shift into reverse and 
back down slowly.

•   Do not turn on slopes unless nec es sary, 

and then, turn slowly and grad u al ly 
downhill, if possible.

Summary of Contents for 193008






























Reviews: