background image

16

LIMITED WARRANTY

Poulan PRO

warrants to the original pur-

chaser that each new

Poulan PRO

brand

gasoline tool or attachment is free from de-

fects in material and workmanship and

agrees to repair or replace under this war-

ranty any defective gasoline product or at-

tachment as follows from the original date of

purchase.

2 YEARS

-- Parts and Labor, when used for

household purposes.

90 DAYS

-- Parts and Labor, when used for

commercial, professional, or income produc-

ing purposes.

30 DAYS

-- Parts and Labor, if used for rental

purposes.

This warranty is not transferable and does not

cover damage or liability caused by improper

handling, improper maintenance, or the use

of accessories and/or attachments not spe-

cifically recommended by

Poulan PRO

for

this tool. Additionally, this warranty does not

cover tune-ups, spark plugs, filters, cutting

line, or rotating head parts that will wear and

require replacement with reasonable use dur-

ing the warranty period. This warranty does

not cover predelivery setup or normal adjust-

ments explained in the instruction manual.

THIS WARRANTY GIVES YOU SPECIFIC

LEGAL RIGHTS, AND YOU MAY HAVE

OTHER RIGHTS WHICH VARY FROM

STATE TO STATE.NO CLAIMS FOR CON-

SEQUENTIAL OR OTHER DAMAGES WILL

BE ALLOWED, AND THERE ARE NO

OTHER EXPRESS WARRANTIES EX-

CEPT THOSE EXPRESSLY STIPULATED

HEREIN.

SOME STATES DO NOT ALLOW LIMITA-

TIONS ON HOW LONG AN IMPLIED WAR-

RANTY LASTS OR THE EXCLUSION OR

LIMITATIONS OF INCIDENTAL OR CON-

SEQUENTIAL DAMAGES, SO THE ABOVE

LIMITATIONS OR EXCLUSION MAY NOT

APPLY TO YOU.

The policy of

Poulan PRO

is to continuously

improve its products. Therefore,

Poulan

PRO

reserves the right to change, modify, or

discontinue models, designs, specifications,

and accessories of all products at any time

without notice or obligation to any purchaser.

U.S. EPA / CALIFORNIA / ENVIRONMENT CANADA

EMISSION CONTROL WARRANTY STATEMENT

YOUR WARRANTY RIGHTS AND OB-

LIGATIONS:

The

U.S.

Environmental

Protection Agency, California Air Resources

Board, Environment Canada and Poulan

PRO are pleased to explain the emissions

control system warranty on your year 2007

and later small off--road engine. In California,

all small off--road engines must be designed,

built, and equipped to meet the State’s strin-

gent anti--smog standards. Poulan PRO must

warrant the emission control system on your

small off--road engine for the periods of time

listed below provided there has been no

abuse, neglect, or improper maintenance of

your small off--road engine. Your emission

control system includes parts such as the

carburetor, the ignition system and the fuel

tank (California only). Where a warrantable

condition exists, Poulan PRO will repair your

small off--road engine at no cost to you. Ex-

penses covered under warranty include diag-

nosis, parts and labor.

MANUFACTURER’S

WARRANTY COVERAGE:

If any emissions

related part on your engine (as listed under

Emissions Control Warranty Parts List) is de-

fective or a defect in the materials or work-

manship of the engine causes the failure of

such an emission related part, the part will be

repaired or replaced by Poulan PRO.

OWN-

ER’S WARRANTY RESPONSIBILITIES:

As the small off--road engine owner, you are

responsible for the performance of the re-

quired maintenance listed in your instruction

manual. Poulan PRO recommends that you

retain all receipts covering maintenance on

your small off--road engine, but Poulan PRO

cannot deny warranty solely for the lack of re-

ceipts or for your failure to ensure the perfor-

mance of all scheduled maintenance. As the

small off--road engine owner, you should be

aware that Poulan PRO may deny you war-

ranty coverage if your small off--road engine

or a part of it has failed due to abuse, neglect,

improper maintenance, unapproved modifi-

cations, or the use of parts not made or ap-

proved by the original equipment manufactur-

er. You are responsible for presenting your

small off--road engine to an Poulan PRO au-

thorized repair center as soon as a problem

exists. Warranty repairs should be completed

in a reasonable amount of time, not to exceed

30 days. If you have any questions regarding

your warranty rights and responsibilities, you

should contact your nearest authorized ser-

vice center or call Poulan PRO at

1--800--554--6723.

WARRANTY

COM-

MENCEMENT DATE:

The warranty period

begins on the date the small off--road engine

is purchased.

LENGTH OF COVERAGE:

This warranty shall be for a period of two

years from the initial date of purchase.

WHAT

IS COVERED: REPAIR OR REPLACE-

MENT OF PARTS.

Repair or replacement of

any warranted part will be performed at no

charge to the owner at an approved Poulan

PRO servicing center. If you have any ques-

tions regarding your warranty rights and re-

sponsibilities, you should contact your near-

Summary of Contents for 545137291


















Reviews: