RoboKaddy
l
As the handle reaches the “in use” position
the mechanism will “click” and lock into
place. Once locked in, lower the upper bag
stay into position. Now fit the zero tip wheel
by placing the wheel housing on the rear
tube and pulling the plunger, allow the plunger
to click into place.
l
Screw the antenna into the screw terminal on the handle.
l
Using the carry strap, carefully place a fully charged battery into the
RoboKaddy battery tray with the lead connector facing the right hand
side of the trolley.
NOTE:
All of the RoboKaddy system LED’s will illuminate to produce a short
“lamp test” when the battery is first connected.
Parts Identification
Antenna
Rotary Speed
Control Knob
Wheel
Spring Clip
Battery
Connection
Lead
Base Power Unit
under battery tray
Front Wheel
Assembly
Lower
Bag Stay
Handle LED Indicator
Manual/Remote
rocker switch
Upper Bag Stay
Assembly
Thank you for purchasing a PowaKaddy RoboKaddy.
Your RoboKaddy is factory programmed and ready for use. However, please
take time to read this manual and practice the various controls before your
first game.
l
Before you do anything else, please put your battery on charge for at
least 24 hours to activate it. To do this, connect your charger to the bat-
tery with the special PowaKaddy Interconnect lead. Now plug the charger
into the mains and leave for 24 hours to activate it.
l
Meanwhile, take time to read this manual and learn about your exciting
new purchase. For a “Quick Start” use the card inside the back cover of
this guide.
l
The PowaKaddy RoboKaddy compromises of a one piece machine that
“snaps” into place in two easy moves, an antenna, handset, zero tip
wheel, battery and charger.
l
With the main section flat on the floor, stand behind the trolley, release the
locking catch beneath the handle by sliding it forward as shown and
pulling up on the main handle.
1
2
