The Power Cooker has several basic cooking modes that may
be used alone or in combination to produce an infinite variety of
results. (See chart on p.11).
When the unit is first plugged in,
0000
will appear on the
LED DISPLAY (1)
.
When a cooking process is selected, such as
COOK (2)
, the
default time will blink 5 times. Then rotating double zeros may
appear on the left side of the
LED Display (1)
to signify it is
building pressure.
Once pressure is built, the zeros will stop rotating and begin
counting down the time.
The device will beep, the
LED DISPLAY (1)
will return to blank,
and then automatically enter
KEEP WARM MODE
once the
time has expired. It will remain in
KEEP WARM MODE
until
manually cancelled.
COOK TIME BUTTON (9)
- You can change the default time
when pressing the cook time button.
DELAY TIME BUTTON (10)
- Your meal will cook at a later
time from 30 minutes to 24 hours in 30-minute increments.
KEEP WARM/CANCEL BUTTON (11)
— While the unit
is in a cooking cycle
KEEP WARM/CANCEL
will stop the
cooking cycle. When a cooking cycle runs its full course, the unit
automatically goes into the
KEEP WARM MODE
.
When the unit is in the
KEEP WARM MODE
, pressing the
KEEP WARM/CANCEL BUTTON (11)
will cancel the
KEEP
WARM
operation.
Pressing the
KEEP WARM/CANCEL BUTTON (11)
when the
unit is in neutral (0000 on LED) mode will reset the unit to the
KEEP WARM MODE
.
0000
2
3
4
5
8
9
10
11
7
1
6
DIGITAL CONTROL PANEL OVERVIEW
10
| 10-QUART POWER COOKER™ MODEL:PC-WAL4
