Power Craft 59213, Instruction Manual

11

ENGLISH

INSTRUCTION MANUAL

Introduction

To get the most out of your new cordless staple
gun, please read through these instructions and
the attached safety instructions before use. We
recommend that you save the instructions in case
you need to remind yourself of the staple gun’s
functions at a later date.

Technical specifications

Battery:

4.8 V Ni-Mh, 1.3 Ah

Brads, max. length:

15 mm, 18 gauge

Staples, length:

4-14 mm, 22 gauge

Max. load:

30 staples/brads per minute

Magazine capacity:

100 brads/staples

Charging time:

approx. 5 hours

List of components

1. Depth setting button

2. Trigger

3. Battery

4. Lock tab

5. Safety switch

6. Magazine

7. Magazine release

8. Power supply

9. Battery charger

10. Brads

11. Staples

Special safety instructions

The staple gun is designed for securing light, thin
materials such as card, plastic, film, fabric and
leather to wood and other materials with similar
properties to wood. The staple gun should not be
used on masonry or other hard surfaces. Never use
the staple gun for installing ceilings.

Secure small items in a vice or similar. Never hold
the item in your hand!

NEVER press the safety switch in when the staple
gun is not in contact with the item! If the gun
discharges staples or brads into the air, this can
result in serious injury or material damage.

Check for concealed power cables, pipes etc. in the
items or surface into which you are going to put
staples or brads.

Never use the staple gun for securing power cables.

1

2

3

4

5

6

7

8

9

1 0

1 1