Helpline No. UK/Northern Ireland 0151 649 1500 Rep. Ireland 1890 946 244
Web Support: WWW.EINHELL.CO.UK
Model Number: 8504
15
Instructions
6
ON/OFF and forward/reverse changeover switch (3)
You can select between clockwise and counterclockwise rotation.
Change the direction of rotation only when the screwdriver is at a
standstill. If you fail to observe this point, the gearing may become
damaged.
Lighting (1)
The lamp (1) enables the work area to be illuminated in unfavorable
lighting conditions. You can switch on the lamp with the switch (5).
Angle setting
The screwdriver can be locked in 3 different angle settings. To do so,
press and hold the locking button (7) and move the screwdriver into
the desired position. Then release the locking button (7).
Important! Before you switch on the screwdriver, make sure
that it is correctly locked in the angle position in question.
Screwdriving
We recommend using self-centering screws (e.g. Torx screws, recessed
head screws) designed for reliable working. Be sure to use a bit that
matches the screw in shape and size. Set the torque, as described
elsewhere in these operating instructions, to suit the size of screw.
PCS4.8V User Guide AW.qxd 13/5/08 12:52 pm Page 16
