Helpline No. UK/Northern Ireland 0151 649 1500 Rep. Ireland 1890 946 244
Web Support: WWW.EINHELL.CO.UK
Model Number: 8504
06
•
Wear suitable clothes. Never wear loose fitting clothes or jewelry.
Keep hair, clothes and gloves away from moving parts.
•
If dust extraction and dust collection devices can be mounted,
ensure that these are connected and are properly used.The use of
a dust extraction system can reduce the danger posed by dust.
Using the treatment of electric tools
•
Do not overload your tool. Only use suitable electric tools to
perform your work. Using the right electric tool allows you to
work better and safer within the tool’s quoted capacity range.
•
Do not use an electric tool whose switch is defective. An electric
tool that no longer can be switched on or off is dangerous and
must be repaired.
•
Pull the plug out of the socket and/or remove the battery before
making any adjustments to the tool, changing accessories or put
the tool down. This precaution eliminates the possibility of
inadvertently starting the tool.
•
When not in use, store electric tools out of the reach of children.
Do not allow those persons to use this tool who are unfamiliar
with it or who have not read these instructions. Electric tools are
dangerous when they are used by inexperienced persons.
•
Take good care of your tool. Check that moving parts properly
function and do not jam, that parts are not broken off or damaged
in any way and that the tool can be used to its full capacity. Have
damaged parts repaired prior to using the tool. The cause of many
accidents can be traced back to poorly maintained electric tools.
•
Keep your blades sharp and clean. Properly maintained blades with
sharp edges jam less frequently and are easier to use.
•
Make sure to use electric tools, accessories, attachments, etc. in
accordance with these instructions. Take the conditions in your
work area and the job in hand into account. Using electric tools
for applications other than those intended can lead to dangerous
situations.
PCS4.8V User Guide AW.qxd 13/5/08 12:52 pm Page 7
