UK Helpline 0203-5142281 • Ireland Helpline 1520-932626
Web Support: www.servotool.eu
Model Number: PBS-950N
10
5) Servicing
(a) Have your machine repaired by a qualified expert using original spare
parts only.
(b) Caution! The use of accessories or add-on devices other than those
recommended in these instructions may mean a risk of injury. Use original
spare parts only.
Electrical safety
When using electric machines always observe the safety regulations
applicable in your country to reduce the risk of fire, electric shock and
personal injury. Read the following safety instructions and also the enclosed
safety instructions.
Always check that the power supply corresponds to the voltage on
the rating plate
Class II machine - double insulation - earth connection not required.
Replacing cables or plugs
Immediately throw away old cables or plugs when they have been replaced
by new ones. It is dangerous to insert the plug of a loose cable in the wall
outlet.
Using extension cables
Only use an approved extension cable suitable for the power input of the
machine. The minimum conductor size is 1.5 mm
2
. When using a cable reel
always unwind the reel completely.
Special safety precautions
• If you are working with the sanding machine, wear always ear protectors
and dust mask.
• The sanding machine is not suitable for wet sanding.
• Check if the switch is not in position “ON”, before you connect the mains
plug to the mains voltage.
• Always keep the mains lead away from moving parts of the tools.
• Use safety glasses, especially when you sand above your head.
safety instructions
BSM6026 Ma-GB 1104-13.indd 10
4/13/11 12:00:44 PM
