UK Helpline 0203-5142281 • Ireland Helpline 1520-932626
Web Support: www.servotool.eu
Model Number: PBS-950N
8
safety instructions
1) Workplace
(a) Keep your workplace clean and tidy. Untidy and badly illuminated work
areas may lead to accidents.
(b) Do not operate this machine in potentially explosive environments
containing combustible liquids, gases or dusts. Electric tools send out
sparks which may ignite dust or vapours.
(c) Keep children and other persons away from the electric tool during use.
When distracted, you may lose control over the apparatus.
2) Electric safety
(a) The plug of the machine has to be suitable for the socket. The connector
may not be modified in any way. Do not use an adapter plug together
with earthed devices. Unchanged connectors and fitting sockets reduce
the risk of an electric shock.
(b) Avoid body contact to earthed surfaces, such as pipes, radiator, stoves and
refrigerators. There is a higher risk of an electric shock, if your body is
earthed.
(c) Keep the machine clear of rain or humidity. The penetration of water into
an electrical device increases the risk of an electric shock.
(d) Do not use the cable for unintended purposes, to carry or suspend the
machine or to pull the connector out of the socket. Keep the cable clear
of heat, oil, sharp edges or any moving parts. Damaged or entangled
cables increase the risk of an electric shock.
(e) When using an electric tool in the open, use an extension cable only
which has been approved for outdoor use. The use of an extension cable
suitable for use in the open will reduce the risk of an electric shock.
Always use an RCD (redicual circuit device or circuit breaker).
(f) Hold the machine at the insulated gripping surfaces as the belt grinder
may hit its own power cord. Damaging a live cable may make metal
machine parts live, which may lead to an electric shock.
3) Personal safety
(a) Please pay attention and watch what you are doing, and carry out the
work with the electric tool sensibly. Do not use the machine, when you
are tired or under the influence of drugs, alcohol or medicine. A moment
of carelessness in the use of the machine could lead to serious injuries.
(b) Wear your safety equipment and always put on safety goggles. Wearing
personal protective gear, such as dust mask, anti-skid safety shoes, hard
hat and ear protection, depending on the type of use of the electric tool,
will reduce the risk of injury.
BSM6026 Ma-GB 1104-13.indd 8
4/13/11 12:00:44 PM
