UK Helpline 0905-460005 • Ireland Helpline 1520-932626
Web Support: www.heltec.eu
Model Number: PDS-180N
14
Maintenance
Disconnect the machine from the mains before carrying out
cleaning and maintenance work.
This machine has been designed to operate over a long period of time with a
minimum of maintenance. Continuous satisfactory operation depends upon
proper machine care and regular cleaning.
Cleaning
Regularly clean the machine housing with a soft cloth, preferably after each
use. Keep the ventilation slots free from dust and dirt. If the dirt does not
come off use a soft cloth moistened with soapy water. Never use solvents
such as petrol, alcohol, ammonia water, etc. These solvents may damage the
plastic parts.
Lubrication
The machine requires no additional lubrication.
Troubleshooting
Faults
Should a fault occur, please contact the address on the warranty card. On the
back page of this manual you will find an exploded view showing the parts
that can be ordered.
Environment
In order to prevent the machine from damage during transport, it is delivered
in a sturdy packaging. Most of the packaging materials can be recycled. Take
these materials to the appropriate recycling locations.
• The electric motor heats up
• The abrasive paper is filled with
adhesive/paint or a similar
material
• Clean the ventilating apertures
• Paint or adhesive is not really dry.
• Some paints stick more to the
abrasive paper than others /
clean the abrasive paper at
regular intervals
