background image

UK Helpline 0905-1460005 • Ireland Helpline 1520-932626

Web Support: www.servotool.eu

 

 

 

 

 

Model Number: PGG-800

Safety instructions

Explanation of the symbols

Read instructions carefully.

 In accordance with essential applicable safety standards of 
European directives.

 Denotes risk of personal injury, loss of life or damage to the tool in 
case of non-observance of the instructions in this manual.

Indicates electrical shock hazard.

Do not use in rain.

Outdoor noise

Risk of high temperature
 Caution: the generator contains some parts which might reach 
high temperatures

 Faulty and/or discarded electrical or electronic apparatus have to 
be collected at the appropriate recycling locations.

Safety instructions
Persons

•  Never allow children or people unfamiliar with these instructions to use 

the appliance. Local regulations may restrict the age of the operator.

•  Always operate outdoors with good ventilation. Exhaust gas contains 

poisonous carbon monoxide.

•  Always stop the engine before refilling the fuel tank and clean the 

machine after filling the fuel tank.

•  Do not inhale fumes from petrol.

Electricity

•  Do not touch the generator if you have wet hands.
•  Do not operate the generator in wet conditions.

PGM6002 Ma GB-IRE-1101-17.indd   8

1/18/11   3:35:38 PM

Summary of Contents for PGG-800





















Reviews: