background image

UK Helpline 02035-142281 • Ireland Helpline 1520-932626 

Web Support: www.servotool.eu

Model Number: PTS-280 

15

Warranty

WARRANTY

          

CerTIFICATe

Year of manufacture: 06/2011     Detail Sander     PTS-280

Congratulations! You have made an excellent choice with the purchase of this Quality 
product. our commitment to quality also includes our service. Should you, contrary to 
expectations, experience defects due to material or manufacturing faults during private 
use within 36 months of the date of purchase we shall be liable for  warranty in 
accordance with statutory warranty regulations, provided that: - The device was not put to any use other 
than the intended.- Was not overloaded. - Was not used with  the wrong accessories. - repairs where not 
carried out by any other than the authorised workshop. The warranty certificate is only valid in connection 
with the receipt. Please keep both in a safe place. The warranty does not affect your statutory rights.
The product is guaranteed for a period of three years beginning on the day of purchase. Keep your purchase 
receipt safe as proof of the date of purchase. The guarantee period can only be extended for the duration of 
any repair required.
during the warranty period if the item becomes defective, in the first instance, please call the helpline. We 
will, at our discretion either repair or exchange the device in accordance with warranty legislation.

Please include the following when sending in your product for repair:

1.   The receipt (proof of purchase)
2.   This warranty certificate with your name, address, contact details and a fault description 
 

completed overleaf.

If the original receipt is not enclosed the repair will be charged for in all cases. After the warranty has 
expired you can still send defective devices for repairs to the address at the end of this booklet. Quotes as 
well as repairs after warranty period are to be paid for in all cases. ensure the product is sent well  packed as 
no responsibility can be accepted for items lost or damaged in transit. This warranty does not affect your 
statutory rights.

EC

          

deClArATIon oF ConForMITY

We 

Ferm B.V.

Lingenstraat 6, 8028  PM  Zwolle, The Netherlands

declare that the design and construction of the following machine, in the form supplied by us, comply with 
the requirements of the appropriate eC directives.
Product description: 

Detail Sander

Model: 

PTS-280

Appropriate eC directives: 

2006/42/EC, 2006/95/EC, 2004/108/EC, 2002/95/EC, 2002/96/EC

Applicable harmonised norms: 

EN55014-1, EN55014-2, EN61000-3-2, EN61000-3-3, EN60745-1, EN60745-2-4, 

EN62079

 

   I. Mönnink
Ceo Ferm b.V. 

06/2011

DSM6045 Ma-GB-IRE 1104-13.indd   15

4/13/11   11:49:36 AM

Summary of Contents for PTS-280

















Reviews: