background image

 

 

 
2. KEEP CHILDREN AWAY 

This appliance is not intended for use by young children or infirm 
persons without supervision. Young children must be supervised to 
ensure that they do not play with this tool. 

3. DON’T FORCE THE TOOL 

Do not put undue strain or force on this power tool. Do not operate for 
extended periods continuously, allow tool to cool. Operate only as 
intended.  

4. DRESS PROPERLY 

Always wear suitable clothing. Do not wear loose clothing. Wear 
suitable footwear and keep long hair away from moving parts. 

5. SAFETY GLASSES 

To avoid the risk of eye damage from flying material always wear 
suitable safety glasses. 

6. EAR PROTECTION 

                                   

To avoid the risk of hearing loss always use a suitable hearing 
protection device. 

7. LUNG PROTECTION 

To avoid the risk of damaging your lungs from inhaling dust or fumes 
always use a suitable dust mask. 

8. PERSONAL INJURY       

                                     

       

 

Keep hands and other body parts away from cutting line when 
operating. Keep other people at least 5 metres away from the work area 
to avoid personal injury through flying objects. 

9. PROTECT THE CORD 

Never carry the power tool by the cord. Do not pull the cord to 
disconnect it from the power supply. Keep cord away from any sharp 
objects or heat source.   
 

Summary of Contents for SD36ZG-11











Reviews: