3
UNPACKING INSTRUCTION
CAUTION!
Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are
present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if
any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing
materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original
factory box and packing.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The
arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.
CONNECTIONS
1. FILTER SWITCH:
The inclusion of a passive crossover
network provides a low pass filter for the built-in subwoofer
and a thru output for full range enclosures. The BI-AMP
mode offers multiple primary advantages: lower distortion,
greater flexibility of signal transmission and an improved
overall performance of your system. The PASSIVE mode has
the advantage of requiring no additional crossovers in order
to keep the subwoofers
’ frequency range within its limits.
WARNING:
Never switch modes if the subwoofer and/or
speakers are wired to an active signal source!
2. INPUT:
Receive the signal coming from an external amplifier.
(P1/-1 connected; +2 -2 not connected)
(BI-AMP +1/-1 LF)
3. OUTPUT:
Link for connecting speakers.
(P1-1 connected; +2 -2 not connected)
(BI-AMP +1/-1 LF)
