12 ft x 1-1/16" Ratchet Strap Hoist
2
For technical questions call: 1-800-665-8685
1580869
V 2.0
SAFETY
IMPORTANT SAFETY PRECAUTIONS
WARNING! The warnings, cautions and instructions discussed in this instruction manual cannot cover all
possible conditions and situations that may occur. It must be understood by the operator that common sense
and caution are factors which cannot be built into this product, but must be supplied by the operator.
WARNING! Always inspect the webbing throughout its length for kinks, frays or any damage before using your
Ratchet Strap Hoist.
WARNING! This Ratchet Strap Hoist is NOT meant for lifting.
PERSONAL SAFETY
1. Dress properly, wear protective equipment. Use breathing, ear, eye, face, foot, hand and head protection.
Always wear ANSI approved impact safety goggles, which must provide both frontal and side protection.
Protect your hands with suitable gloves. Protect your head from falling objects by wearing a hard hat.
Wear ANSI approved earplugs. Protective, electrically non-conductive clothes and non-skid footwear are
recommended when working. Wear steel toed boots to prevent injury from falling objects.
2. Do not over reach; keep proper footing and balance at all times. Proper footing and balance enables better
control of the tool in unexpected situations.
3. Keep any articles of clothing, jewelry, hair etc. away from moving parts. These can be caught in moving
parts, resulting in damage to the tool and/or serious injury.
4. Stay alert, watch what you are doing and use your common sense. Do not operate any machine or tool when
you are tired, under the influence of drugs, alcohol or medications.
SPECIFIC SAFETY PRECAUTIONS
1. Inspect webbing regularly. Check for fraying, kinks, broken strands or distortion. If they appear, the webbing
should be replaced.
2. DO NOT pull webbing over or around a corner.
3. DO NOT wrap the webbing around any object and hook it back on itself.
4. Know how much load you are pulling. DO NOT OVERLOAD.
5. Never use a “cheater” pipe or other device to lengthen the handle for additional leverage. This will cause it to
bend or break thereby destroying the tool.
6. DO NOT operate the Ratchet Strap Hoist with less than three wraps of the webbing on the spindle.
7. If possible, always use an adequate sling, eyebolt or other accessory attached to the load to be pulled.
Always make sure that there is positive engagement of the Ratchet Strap hook to the load.
TOOL USE AND CARE
Use the right tool for the job. Do not attempt to force a small tool or attachment to do the work of a larger industrial
tool. The tool will perform better and more safely at the task for which it was intended. Do not modify this tool or
use for a purpose for which it was not designed.
