Cleaning
Warning:
• Always dispose of paints, coating and other chemicals in a proper and
responsible fashion. If you have questions regarding the proper disposal
of any chemical, contact the chemical manufacturer for instructions.
1. De-pressurize the canister (#B-02) and disconnect the hose.
2. Remove the cover assembly from the canister as described in
Operation.
3. Empty the paint or coating from the canister. Dispose of properly.
4. Pour a small amount of clean solvent (as specified by the paint
manufacturer) in the canister. See safety Safety Information #5.
5. Place the cover assembly into the canister and tighten until the
assembly is sealed.
6. Reconnect the air hose to the regulator assembly and pressurize the
cup.
7. Clean the paint spray gun by shaking it vigorously and spraying the
solvent though the gun.
8. Repeat steps 1 through 7 until the sprayed solvent appears clean and
clear.
9. After de-pressurizing, disconnect the regulator from the air supply.
10. Remove the cover assembly from the canister and dispose of the
surplus solvent.
11. Wipe the canister clean with a dry, lint free cloth.
Caution:
• For a very thorough cleaning, the canister ONLY may be fully immersed
in solvent. Do NOT leave in solvent for more than 24 hours as damage
may occur. Never immerse the paint sprayer in solvent. When cleaning,
brush solvent onto exterior parts only.
8006577manual 4/4/06 12:28 PM Page 8