Technical Specifications
• Model: 8059851
• Air pressure: 30-80 PSI
• Nozzle diameter: 1.4 mm
• Type of feed: Gravity
• Air consumption: 5 CFM
• Pattern width: 7-1/2" (190 mm)
• Paint capacity: 3.5 oz
Operation
1. Suggested air pressure is 30-80 PSI
2. Recommended paint viscosity differs according to paint properties and
painting conditions.
3. Use the lowest possible fluid output that produces an adequate paint
coverage. Finer atomization leads to a better finish.
4. Maintain a distance of 6-8" from the gun to the workpiece.
5. The gun should be held so that it is perpendicular to the surface of the
workpiece at all times. Move the gun in a straight and horizontal line.
Arcing the gun results in an uneven paint finish.
Coating
will be light
at this
point
Coating
will be
heavy at
this point
Start
stroke
End of
stroke
Pull
trigger
Release
trigger
Coating should be
even and wet
when spraying
Incorrect
method
Correct
method
