Power Fist 8091001, User Manual

6 pc Air Hammer Kit

Visit www.princessauto.com for more information 

3

8091001 

V 3.03

PERSONAL SAFETY 

WARNING! Wear personal protective equipment approved by the Canadian Standards Association 

(CSA) or American National Standards Institute (ANSI). 

Personal Protective Equipment 

1.  Always wear impact safety goggles that provide front and side protection for the eyes. Wear a 

full-face shield if your work creates metal filings or wood chips.

2.  Wear gloves that provide protection based on the work materials or to reduce the effects of 

tool vibration.

3.  Non-skid footwear is recommended to maintain footing and balance in the work environment.

4.  Wear protective clothing designed for the work environment and tool. 

5.  Wear a NIOSH approved respirator when working on materials that produce dust or 

particulate matter.

6.  This tool can cause hearing damage. Wear hearing protection gear with an appropriate Noise 

Reduction Rating to withstand the decibel levels.

Personal Precautions

Control the tool, personal movement and the work environment to avoid personal injury or          

damage to tool. 

1.  Do not operate any tool when tired or under the influence of drugs, alcohol or medications.

2.  Avoid wearing clothes or jewelry that can become entangled with the moving parts of a tool.  

Keep long hair covered or bound.

3.  Do not overreach when operating a tool. Proper footing and balance enables better control in 

unexpected situations.

4.  Support the workpiece or clamp it to a stable platform. Holding the workpiece by hand or 

against your body may lead to personal injury. 

5.  Securely hold this tool using both hands. Using a tool with only one hand can result in loss 

of control.

SPECIFIC SAFETY PRECAUTIONS

1.  Attach all accessories properly to the tool before connecting the air supply. A loose accessory 

may detach or break during operation

2.  Before using this tool, make sure you know the work area and material you are working on. 

Make sure you do not accidentally puncture pipes, pressurized containers or electrical cables.

3.  Do not point the tool at yourself or others. Keep hands and other body parts away from the 

chisel to avoid injury.

4.  Only use with accessories rated to handle the forces exerted by this tool during operation. 

Accessories not designed for the forces generated may break and forcefully launch pieces.

5.  Do not lay the tool down until it has come to a complete stop. Moving parts can grab the 

surface and pull the tool out of your control.

6.  The chisels will become hot while chipping. Allow the chisels to completely cool              

before touching.