12V Marine Utility Pump
7
Visit www.princessauto.com for more information
8171118
V 3.02
MAINTENANCE
CAUTION! Always turn the craft’s ignition switch to the OFF position and disconnect the power
cords from the craft’s 12 volt DC electrical system before performing any inspection, adjustment,
maintenance or cleaning.
1. Before each use, inspect the general condition of the utility pump. Check for loose screws,
misalignment or binding of moving parts, cracked or broken parts, damaged electrical wiring,
loose or leaking suction and discharge hoses, and any other condition that may affect the safe
and efficient operation of the utility pump. If abnormal noise or vibration occurs, have the
problem corrected before further use. Do not use damaged equipment.
2. When necessary, with a clean, dry cloth or vacuum, remove all dirt and debris from the
utility pump.
STORAGE
The pump itself is not affected by freezing temperatures. If you are using your craft in the winter, please
ensure that no traces of ice are found within or surrounding the utility pump before using it. Ice can
permanently damage the impeller blades if switched on.
DISPOSING OF THE DEVICE
If your device has become damaged beyond repair, do not throw it out. Bring it to the appropriate
recycling facility.
