8336877
V 1.42
55
For any technical questions, please call 1-800-665-8685
maInTenanCe
1. Bonnets can be machine-washed in cold water with a small amount of detergent on a short wash cycle. Machine
dry at medium heat. However, hand washing and drying is recommended for longer bonnet life.
2. To prolong pad life and shape, always store polisher with pad face up.
3. Remove bonnet from the pad when polisher is not in use so pad can dry out and retain its original shape.
4. Badly oxidized paint may require several applications. Do not use abrasive compounds.
5. The most common error is applying too much wax and cleaner/glaze. If pad becomes saturated, polishing will be
more difficult and take longer. It may also reduce pad life.
6. If the bonnet continually comes off the pad, you may have used too much wax, cleaner or glaze.
7. If wax seems difficult to buff, you may have used too much wax.
8. Use only mild soap and a damp sponge to clean polisher. Do not immerse any part in liquid. If polisher needs
repair, use only identical replacement parts.
kNOW yOUr BUFFEr/POlISHEr
The safe use of this product requires an understanding of the
information on the tool and in this operator’s manual as
well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all
operating features and safety rules.
aPPlICaTIOn BOnneT
The reusable application bonnet is used for applying waxes,
buffing or polishing.
waxInG/POlIshInG BOnneT
The reusable waxing/polishing bonnet is for wax removal and
final polishing of autos, boats and furniture.
FOam PaD
The buffer/polisher comes with a rotating base that moves in
random orbital motion. 6” in diameter.
COrD
The buffer/polisher has a 180 cm power cord.
swITCh
It is used to turn on/off the buffer.
TO remOVe PaD
Insert a screwdriver of any type between polisher and pad. Use a flat-bladed screwdriver to remove and install pad.
Turn clockwise to remove, counter clockwise to install.
