8353229
1 HP Mini Dust Collector
V4.0
10
For technical questions call 1-800-665-8685
CARE & MAINTENANCE
1. Maintain the tool with care. A tool in good condition is efficient, easier to
control and will have fewer problems.
2. Inspect the tool components periodically. Repair or replace damaged or
worn components. Only use identical replacement parts when servicing.
3. Periodically check the impeller for damage caused by wood chips or debris
in the airflow.
4. Check the motor brushes for wear and replace when worn down.
5. Keep the tool handles clean, dry and free from oil/grease at all times.
6. Maintain the tool’s labels and name plates. These carry important information.
If unreadable or missing, contact Princess Auto Ltd. for replacements.
7. Inspect the bag for wear or tears and replace if necessary.
a. Replacement bags are available through Princess Auto (SKU 8353229).
8. Check that the hose clamp is tight before each use to prevent the bag from
blowing off.
WARNING! Only qualified service personnel should repair the tool. An
improperly repaired tool may present a hazard to the user and/or others.
CARBON BRUSH MAINTENANCE
The carbon brushes may require maintenance when the motor performance of
the tool decreases or stops working completely.
1. Remove the brush caps (#39).
2. Remove the carbon brushes from the housing. Keep track of how the
carbon brushes are orientated during removal. The concave surface must
be oriented in the same way if the brushes are reused. This will prevent
unnecessary wear after reinstalling them.
3. Clean old carbon brushes before reinstalling them. Rub the contact areas
with a pencil eraser.
4. Reinsert the old carbon brushes in the same orientation to reduce wear.
5. Replace both carbon brushes if either is worn down more than 50 percent.
