Power Fist 8353237, User Manual

3

For technical questions call: 1-800-665-8685

V 1.50

8353237

1 HP Dust  

Collector

SPECIFICATIONS

• 1 HP motor 

• Inlet diameter: 4"

• 600 CFM   

• Includes 2 cotton dust bags, 2 bag clamps

• Fan diameter: 9"

SAFETY PRECAUTIONS

Warning:   The dust collector is designed to collect woodchips at factories or workshops. It is not suitable for 

picking up hazardous dust or material which cannot safely pass through the impeller, such as solid 

wood scraps. 

Read and understand all instructions before using this tool. Failure to follow all instructions may result in electric 

shock, fire and/or personal injury. Keep this manual for the safety warnings and precautions, operating, inspection 

and maintenance instructions. When using this tool, basic precautions should always be followed to reduce the risk 

of personal injury and/or damage to the equipment. Note that when this manual refers to a part number, it refers to 

the parts list included.

WORK AREA

1.  Keep your work area clean and well lit. Cluttered and dark areas invite accidents.

2.  Operate in a safe work environment. Do not use in damp or wet locations. Do not expose to rain. Do not use 

in the presence of flammable gases or liquids.

3.  Keep children, bystanders and visitors away from the work area. Distraction can cause you to lose control. 

Do not let them handle tools, hoses or extension cords. No one should be in the work area if they are not 

wearing suitable protective equipment.

4.  Store unused equipment. When not in use, tools must be stored in a dry location to prevent rust. Always 

lock up tools and keep them out of reach of children.

PERSONAL SAFETY

1.  Use eye, face, head, breathing and ear protection. Always wear ANSI approved impact safety goggles, which 

must provide both frontal and side protection. Protect your hands with suitable gloves. Wear a full face 

shield if your work creates metal filings or wood chips. Protect your head from falling objects by wearing a 

hard hat. Wear an ANSI approved dust mask or respirator when working around metal, wood and chemical 

dusts and mists. Wear ANSI approved earplugs.

2.  Do not over reach; keep proper footing and balance at all times. Proper footing and balance enables better 

control of the tool in unexpected situations.

3.  Dress properly, wear protective equipment. Do not wear loose clothing or jewelry as they can be caught in 

moving parts. Tie back long hair. Protective, electrically non-conductive clothes and non-skid footwear are 

recommended when working.

4.  Stay alert, watch what you are doing and use your common sense. Do not operate any machine or tool when 

you are tired, under the influence of drugs, alcohol or medications.