8442923
2-3/4 Ton Pallet Jack
V1.0
4
For technical questions call 1-800-665-8685
2. Avoid wearing clothes or jewelry that can become entangled with the
moving parts of a tool. Keep long hair covered or bound.
3.
Do not overreach when operating a tool. Proper footing and balance
enables better control in unexpected situations.
5.
Securely hold this tool using both hands. Using a tool with only one
hand can result in loss of control.
SPECIFIC SAFETY PRECAUTIONS
WARNING! DO NOT let comfort or familiarity with product (gained from
repeated use) replace strict adherence to the tool safety rules. If you use
this tool unsafely or incorrectly, you can suffer serious personal injury.
1.
Use the correct tool for the job. This tool was designed for a specific
function. Do not modify or alter this tool or use it for an unintended
purpose.
2. Do not use the tool if any parts are damage broken or misplaced.
Repair or replace the parts.
3.
Before lowering load, ensure that there are no obstructions underneath
and that all people are standing clear.
4.
Never allow anyone to ride on the pallet jack.
5.
Operate on smooth, level, finished floors only; do not use on ramps or
sloping floors.
6. To prevent accidental tipping, make sure load is centered on the pallet
jack’s forks.
7.
Do not lift a load with fork tips only. This may cause damage to the forks
and personal injury if the rear of the pallet jack suddenly tips upward.
8. Know the weight of the load being lifted. Do not exceed the maximum
capacity (see Specifications). Overloading can cause damage to or
failure of the jack.
9. Never leave a loaded pallet jack unattended in the raised position.
Always lower the load to the floor.
10. Pull pump release lever slowly to allow load to descend in a controlled
manner.
11. Secure load before transporting.
12. Only move the loaded pallet jack by manual force.
13. The handle is designed to pull and steer the pallet jack only. Do not use
the handle as a leverage tool.
