3.
Tightly recap all containers immediately after mixing and store in another
location to minimize vapours in the spray area and eliminate the potential
for spills.
4.
Verify that all connections are secure before operating the paint spray
gun.
5.
Do not operate the HVLP turbine in the presence of open containers or
spillage.
a.
Make sure all vapours have dispersed prior to turning the HVLP
sprayer on.
6.
Do not allow the spray to strike you and do not spray toward people or
animals. Do not spray the tool itself or any electrical sources.
7.
Do not leave the spray gun under pressure while unattended. Turn the
HVLP turbine off and relieve the pressure in the paint spray gun.
8.
Paint or solvent flowing through the equipment is able to produce static
electricity. Static electricity creates a risk of fire or explosion in the
presence of paint or solvent fumes. All parts of the spray system,
including the pump, spray gun and any objects in and around the spray
area shall be properly grounded to protect against static discharge and
sparks.
9.
Have a working fire extinguisher present while operating the spray paint
gun.
10. This paint spray gun is intended for household use only.
11. Do not leave the air tool unattended with its compressed air supply on.
Turn off the compressed air supply and bleed the air tool of any remaining
compressed air before leaving the air tool unattended.
12. Serious injury may occur from loose debris being propelled at high speeds
from the compressed air stream. Always wear OSHA approved safety
glasses to protect the eyes during operation of the air compressor.
13. Do not cover the air vents. Proper cooling of the motor is necessary to
ensure normal life of the tool.
AIR HOSE PRECAUTIONS
1.
Inspect the tool's air hose for cracks, fraying or other faults before each
use. Discontinue use if the air hose is damaged or hissing is heard from
the air hose or couplers. Replace the defective air hose.
8492910
HVLP ELECTRIC PAINT SPRAY SYSTEM
V1.0
www.princessauto.com / 1-800-665-8685
Page 6