6.
Make certain the power source conforms to requirements of your
equipment (see Specifications).
7.
A polarized plug has two blades of different widths, allowing only one
way to insert the plug into the outlet. If the outlet does not accept a
polarized plug, contact a qualified electrician to install a polarized outlet.
Do not alter the plug, as this may compromise the built-in safety feature.
POWER TOOL PRECAUTIONS
1.
Do not use any power tool with a malfunctioning power switch or control.
A power tool that fails to respond to the controls is dangerous and can
cause an injury. A qualified technician must repair and verify the power
tool is operating correctly, before it can be used.
2.
Shut the power off and disconnect the spray gun from the power supply
(if possible) before making any adjustments, changing accessories,
cleaning, servicing or when storing. Such preventive safety measures
reduce the risk of starting the tool accidentally.
3.
Never force the spray gun. Excessive pressure could break the tool,
resulting in damage to your workpiece or serious personal injury.
Excessive pressure is the cause if your tool runs smoothly under no load,
but roughly under load.
4.
Check if the spray gun's moving parts are misaligned or binding before
each use. Correct the issue before using the spray gun to avoid an injury
or damage to the tool.
5.
The material and the motor housing can get very hot during operation.
Stop work until the spray gun and the spray nozzle both cool down to a
safe temperature.
6.
Do not cover the air vents. Proper cooling of the motor is necessary to
ensure normal life of the tool.
7.
Avoid unintentional starts. Be sure that the regulator/throttle switch is in
the neutral or OFF position when not in use and before connecting it to
any air source.
8.
Avoid unintentional starts. Make sure the power switch is set to OFF
before connecting the spray gun to a power supply.
8492910
HVLP ELECTRIC PAINT SPRAY SYSTEM
V1.0
www.princessauto.com / 1-800-665-8685
Page 8