14.4V Cordless Grease Gun
Visit www.princessauto.com for more information
3
8505547
V 3.03
PERSONAL SAFETY
CAUTION! Wear protective equipment approved by the Canadian Standards Association (CSA) or
American National Standards Institute (ANSI) when using the tool.
1. Dress properly, wear protective equipment. Use breathing, ear, eye, face, foot, hand and head
protection. Always wear ANSI approved impact safety goggles, which must provide both
frontal and side protection. Protect your hands with suitable gloves. Protect your head from
falling objects by wearing a hard hat. Wear an ANSI approved dust mask or respirator when
working around metal, wood and chemical dusts and mists. Wear ANSI approved earplugs.
Protective, electrically non-conductive clothes and non-skid footwear are recommended
when working. Wear steel-toed boots to prevent injury from falling objects.
2. Control the tool, personal movement and the work environment to avoid personal injury or
damage to the tool. Stay alert, watch what you are doing and use your common sense.
3. Keep articles of clothing, jewelry, hair, etc., away from moving parts to avoid entanglement.
4. Do not operate any machine / tool when tired or under the influence of drugs, alcohol
or medications.
5. Do not overreach when operating a tool. Proper footing and balance enables better control of
a tool in unexpected situations.
6. Use clamps or other practical ways to support or secure the work piece to a stable platform.
Holding the work piece by hand or against your body is not stable and may lead to loss of
control and injury.
SPECIFIC SAFETY PRECAUTIONS
WARNING! The grease gun can develop high pressure, up to 8,000 PSI. Use safety glasses and
gloves for protection during operation. Keep hands clear of the exposed rubber portions of the hose.
WARNING! Extreme pressure may cause the nozzle extension or flex hose to burst. Use only
approved hoses and follow whip instructions and warnings.
1. Always wear fuel and oil-resistant gloves when working with fluids.
2. Do not store the tool under extreme conditions.
3. Do not adapt the tool for any other purpose than what it was originally intended for.
4. When operating the tool, use proper eye and hearing protection as well as protective gloves.
5. To maintain complete control, firmly hold your tool with both hands.
6. Never point the tool towards yourself.
7. Never force the tool. Excessive pressure could bend or break the tool or accessory, resulting
in damage to the tool, your work piece or serious personal injury.
8. Do not use the battery charger in damp or wet locations. Do not use the grease gun or
charger if it has been dropped, damaged, left outdoors, or immersed in liquid. To avoid
electrical shock, do not handle the charger, its power cord plug or the grease gun with
wet hands.
9. Remove adjusting keys or wrenches before turning the tool on. A wrench or key that is left
attached may result in personal injury.
