SAVE THIS MANUAL
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
SAFETY WARNINGS AND PRECAUTIONS
WARNING: When using tool, basic safety precautions should always be followed to reduce
the risk of personal injury and damage.
Read all instructions before using this
tool
!
1. Keep work area clean.
Cluttered areas invite injuries.
2. Observe work area conditions.
Do not use machines or power tools in damp or wet
locations. Don’t expose to rain. Keep work area well lighted. Do not use electrically
powered tools in the presence of flammable gases or liquids.
3. Keep children away.
Children must never be allowed in the work area. Do not let them
handle machines, tools, or extension cords.
4. Store idle equipment.
When not in use, tools must be stored in a dry location to inhibit
rust. Always lock up tools and keep out of reach of children.
5. Do not force tool.
It will do the job better and more safely at the rate for which it was
intended. Do not use inappropriate attachments in an attempt to exceed the tool capacity.
6. Use the right tool for the job.
Do not attempt to force a small tool or attachment to do
the work of a larger industrial tool. Do not modify this tool and do not use this tool for a
purpose for which it was not intended.
7. Dress properly.
Do not wear loose clothing or jewelry as they can be caught in moving
parts. Protective, electrically non-conductive clothes and non-skid footwear are
recommended when working. Wear restrictive hair covering to contain long hair.
8. Use eye and ear protection.
Always wear ANSI approved impact safety goggles. Wear
2
For technical questions call: 1-800-665-8685
SPECIFICATIONS
Pipe/Tube Notcher
Pipe/Tube Capacity (mm//in)
50 // 2
Material of
Steel
Chuck Dimension (mm//in)
13 // 1/2
Adjustment Degree Range/Increments
0-
45
° left / 1°
Clearance between Chuck & Table (mm//in)
356 // 14
13,16//1/2,5/8
Spindle Threads for Mounting Hole Saw (mm/in)
Pipe/Tube Notcher
