PERSONAL PRECAUTIONS
Control the tool, personal movement and the work environment to avoid
personal injury or damage to tool.
1.
Do not operate any tool when tired or under the influence of drugs,
alcohol or medications.
2.
Avoid wearing clothes or jewelry that can become entangled with the
moving parts of a tool. Keep long hair covered or bound.
3.
Do not overreach when operating a tool. Proper footing and balance
enables better control in unexpected situations.
4.
Keep your fingers away from the trigger/switch while carrying the tool,
attaching an air hose or an accessory. Lock the trigger/switch safety if
available.
5.
Avoid unintentional starts. Be sure that the regulator/throttle switch is in
the neutral or OFF position when not in use and before connecting it to
any air source.
6.
Never point the air stream or tool at any point of your body, other people
or animals. Debris and dust ejected at high speed can cause an injury.
7.
Serious injury or death may occur from inhaling compressed air. The air
stream may contain carbon monoxide, toxic vapors or solid particles.
Never inhale compressed air directly from the pump or air tool.
SPECIFIC SAFETY
WARNING! DO NOT let comfort or familiarity with product (gained from
repeated use) replace strict adherence to the tool safety rules. If you use
this tool unsafely or incorrectly, you can suffer serious personal injury.
WARNING! Ensure that the load is secure and centered on the device. Do
not allow the load to move or tilt as the device may kick out causing
injury to the operator and/or cause the load to fall.
1.
Do not exceed the maximum capacity to prevent equipment failure or
damage.
2.
Always place the device on a hard, level surface capable of supporting the
load. Allow enough clearance around the device and the load for
movement.
3.
Inspect the device before each use. Do not use if it is bent, cracked,
damaged or has been subjected to a sudden or unexpected (shock) load.
V1.0
PNEUMATIC/HYDRAULIC BOTTLE JACK
8668147
Page 5
www.princessauto.com / 1-800-665-8685
