8670978
Portable 12V Air Compressor with LED Light
V4.0
8
For technical questions call 1-800-665-8685
7. Disconnect the 12V adaptor from the outlet and wrap the cord into the
slotted base for storage.
CARE & MAINTENANCE
1. Maintain the tool with care. A tool in good condition is efficient, easier to
control and will have fewer problems.
2. Inspect the tool fittings, alignment, hoses and power supply cord periodically.
Have damaged or worn components repaired or replaced by an authorized
technician. Only use identical replacement parts when servicing.
3. Only use accessories intended for use with this tool.
4. Do not disassemble the air compressor.
WARNING! Only qualified service personnel should repair the tool. An
improperly repaired tool may present a hazard to the user and/or others.
REPLACING THE FUSE
The air compressor has a 15 Amp, 250V fuse installed in the 12V adaptor (see
Specifications). A spare fuse is included in the kit should a replacement be required.
1. Unscrew the cap end of the 12V adapter counterclockwise until it is freed.
2. Remove the spent fuse and discard as appropriate according to local by-laws.
3. Drop the new F15AL250V fuse into the opening in the 12V adaptor.
4. Align the top of the fuse so it enters into the electrode in the cap.
5. Screw the cap in a clockwise direction until snug.
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate facility.
Contact your local municipality for a list of disposal facilities or by-laws for
electronic devices, batteries, oil or other toxic liquids.
TROUBLESHOOTING
Visit a Princess Auto Ltd. location for a solution if the tool does not function
properly or parts are missing. If unable to do so, have a qualified technician
service the tool.
