8699795
Double Burner Angle Iron Stove
V4.0
6
For technical questions call 1-800-665-8685
IDENTIFICATION KEY
A Burner
B Drip- Pan
C Body
D Electronic Ceramic Needle
E Pressure Sensor-Lock Lever
F
Switch
G Auto Gas Shut-Off Safety Device
H Valve
I
Side Panel
OPERATION
Letter references in parenthesis (A) refer to the included Identification Key.
1. Ensure the switch (F) is set to OFF.
2. Flip the pressure sensor-lock lever (E) to UNLOCK.
3. Flip the side panel (I) down on one or both sides, depending if you are
using one or both burners. Insert your finger into the panel’s hole to open
it.
4. Insert the butane gas cartridge into the valve (H) and ensure it is properly
seated. The arrow on the valve lines up with the notch in the butane
cylinder’s collar.
5. Flip the pressure sensor-lock lever to LOCK. This will seal the butane
cylinder in place.
a. The pressure sensor-lock lever will only lock when the drip-pan
supports are properly installed and the switch is in the OFF position.
Fig. 1