V4.0
4 Ton Low Profile Floor Jack
8760621
Visit www.princessauto.com for more information
5
5. Rest the jack’s base on a firm, level surface capable of sustaining the load.
The jack must be free to roll under the vehicle. Keep the surface clean and
free from debris.
6. Make sure the saddle is fully positioned under the load before operating.
7. Make sure the load is stable, so it does not shift when lifting or lowering.
8. Make sure there is enough clearance around the jack and the load during
lifting or lowering actions, a minimum of 1-1/2 feet (0.5 metres).
9. Before lifting a vehicle, apply the emergency brake and block all wheels.
10. Do not lift a vehicle while people are inside it.
11. Support the load with jack stands or a support structure of adequate
capacity immediately after lifting. Never work under a load without
additional support devices.
12. The jack must remain in a static position for lifting and lowering loads.
Never move a load that is elevated on the jack. Ensure the load remains
stable at all times.
13. Do not push a load off the jack; lower carefully.
14. Before lowering load, ensure that there are no obstructions underneath and
that all people are standing clear.
15. Do not place your hands between the moving components.
16. Never allow load to tilt on the jack as the jack may kick out causing injury
to the operator and/or cause the load to fall.
HYDRAULIC PRECAUTIONS
DANGER! Seek immediate medical attention if hydraulic fluid under pressure
penetrates your skin. See Injection Injury precautions for instructions
before using a pressurized hydraulic system.
1. Do not touch or handle hydraulic hoses or components while under pressure.
Hydraulic fluid escaping under pressure has sufficient force to penetrate your
clothing and skin. A pinpoint hole may inject hydraulic fluid into your body.
Seek immediate medical attention if this occurs (see Injection Injury).
2. Never exceed the hydraulic system’s load capacity (see Specifications).
3. Do not adjust the hydraulic system’s relief setting. The settings are preset
by the factory.
Summary of Contents for 8760621
Page 17: ...V4 0 4 Ton Low Profile Floor Jack 8760621 Visit www princessauto com for more information 17...
Page 19: ...V4 0 4 Ton Low Profile Floor Jack 8760621 Visit www princessauto com for more information 19...
Page 20: ...8760621 4 Ton Low Profile Floor Jack V4 0 20 For technical questions call 1 800 665 8685...
