V1.0
5 in. Air Angle Grinder
8843534
Visit www.princessauto.com for more information
7
COMPRESSOR/TANK PRECAUTIONS
DANGER! Do not use an air tank beyond its expiration date. A tank rupture or
explosion may kill or cause a serious injury to yourself or a bystander. Disable
and discard the air tank according to the your municipality by-laws.
1.
Never drill into, weld, patch or modify the air tank. Immediately replace the
tank or compressor if an air leak develops. The leak may lead to a rupture.
2. Never make adjustments to the components that control tank pressure.
Serious injury or death may occur if modifications are made to the pressure
switch, safety relief valve or other components that control the tank pressure.
3.
Check operation of the pressure relief valve on a regular basis and never
operate without a factory approved pressure relief valve. Do not make
alterations to the factory operating pressure settings.
POWER TOOL PRECAUTIONS
Tool accessory is a general term that refers to drill bit, saw or cutting blades,
grinding wheel, etc. as appropriate for the tool.
1.
Do not use any power tool with a malfunctioning power switch or control.
A power tool that fails to respond to the controls is dangerous and can
cause an injury. A qualified technician must repair and verify the power
tool is operating correctly, before it can be used.
2. Do not cover the air vents.
3.
Disconnect the power source before installing or servicing the tool.
4.
Never force the tool. Excessive pressure could break the tool, resulting in
damage to your workpiece or serious personal injury. Excessive pressure is
the cause if your tool runs smoothly under no load, but roughly under load.
5.
Keep hands and fingers away from the work area. Any part of body
contacting the tool’s working parts could cause an injury.
6. Only use accessories that are specifically designed for use with the tool.
Ensure the accessory is tightly installed.
7.
Never touch the tool accessory or workpiece during or immediately after use.
They may be hot and could inflict a burn injury.
8. Never use a tool with a cracked or worn tool accessory. Change the tool
accessory before using it.
