V1.0
7 in. Variable Speed Electric Sander/Polisher
8864944
Visit www.princessauto.com for more information
7
3.
Do not cover the air vents. Proper cooling is necessary prevent damage
to the tool’s motor.
4.
Avoid unintentional starts. Ensure the switch is off when connecting to
the power source.
5.
Disconnect the power source before installing or servicing the tool.
6. Never point the tool towards yourself. It could inflict an injury.
7.
Never force the tool. Excessive pressure could break the tool, resulting
in damage to your workpiece or serious personal injury. Excessive
pressure is the cause if your tool runs smoothly under no load, but
roughly under load.
8.
Keep hands and fingers away from the work area. Any part of the body
contacting the tool’s working parts could result in an injury.
9. Only use accessories that are specifically designed for use with the
tool. Ensure the accessory is tightly installed.
10. Only use an accessory that exceeds the Speed Rating (see
Specifications).
11. Before using the tool on a workpiece, test the tool by running it at the
highest Speed Rating for at least 30 seconds in a safe position. Stop
immediately if there is any abnormal vibration or wobbling. Check the
tool to determine the cause.
12. Take work breaks to prevent the tool's motor from overheating and/or
overloading.
13. Never use a tool with a cracked or worn tool accessory. Change the
tool accessory before using it.
14. Do not start the tool when the tool’s accessory is touching the
workpiece.
15. Do not place the tool down until the tool’s accessory has stopped moving.
The accessory may catch the surface of work material and wrench itself
free, causing injury to the user or others in the work area.
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace the
missing part before operating. Failure to do so could result in a malfunction
and personal injury.
Remove the parts and accessories from the packaging and inspect for damage.
Make sure that all items in the contents are included.
