V1.0
Electric Stapler and Nailer
8865107
Visit www.princessauto.com for more information
7
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace the
missing part before operating. Failure to do so could result in a malfunction
and personal injury.
Remove the parts and accessories from the packaging and inspect for damage.
Make sure that all items in the contents are included.
Contents: • Electric Stapler/Nailer
• 18 gauge x 5/8 in. nails (100)
• 9/16 in. T50 staples (420)
IDENTIFICATION KEY
A
Magazine Loading Lever
B
Slider
C
Magazine
D
Tacker Head
E
Soft Grip Handle
F
Trigger
G
Impact Control Wheel
H
ON/OFF Switch
OPERATION
Letter references in parenthesis (A) refer to the included Identification Key.
LOADING STAPLES/NAILS
1.
Turn tool upside down.
2. Press the lever (A) while pulling the slider (B) backwards.
3.
Insert the staple or nail strip into the magazine (C) with the points
facing upward (see Specifications for capacity).
a.
Tilt the tool towards the side with the nail symbol, found on the
tacker head, when inserting a nail strip (not included). The nail
strip should rest on that side of the magazine.
4.
Push the slider against tacker head (D) until it locks into place with a snap.
