V4.0
Wood-Burning Fire Pit
8887432
Visit www.princessauto.com for more information
5
2. Insert all the pieces into the
corresponding hole position.
NOTE: Keep all bolts loose during the
assembly of this step until all parts are
installed into the correct position.
3. Insert the assembled cover into
the corresponding hole position.
4. Fully assembled.
CARE &
MAINTENANCE
LIGHTING
1.
Make sure there is only a small
amount of ash in the bottom of the bowl.
2.
Place a layer of dry kindling or a natural fire-starter onto the center of the
fire bowl.
3.
Place above that a layer of dry seasoned hardwood that is no more than 3/4
the length of the bowl diameter.
4.
Use a match to light kindling or fire-starter.
TENDING THE FIRE
You may need to shift and/or add logs for an ideal experience.
DO NOT place hot fire pit tools onto combustible surfaces such as grass,
wooden deck or furniture.
