V4.0
11 ft Drywall Hoist with Tilting Action
8937732
Visit www.princessauto.com for more information
11
12. Fold the base by pressing down on the slide yoke ring (H), then pivot
the legs in until they lock in the closed position.
CARE & MAINTENANCE
WARNING! Only qualified service personnel should repair the tool. An
improperly repaired tool may present a hazard to the user and/or others.
1. Maintain the tool with care. A tool in good condition is efficient, easier
to control and will have fewer problems.
2. Inspect the tool components periodically. Repair or replace damaged or
worn components. Only use identical replacement parts when servicing.
3. Maintain the tool’s labels and name plates. These carry important
information. If unreadable or missing, contact Princess Auto Ltd. for
replacements.
WARNING! Only qualified service personnel should repair the tool. An
improperly repaired tool may present a hazard to the user and/or others.
CLEANING
Clean the drywall lift thoroughly a damp cloth after each use.
LUBRICATION
Lubricate moving parts (pulleys, hinges, bearings, etc.) with light oil or
grease
STORAGE
The drywall lift should not be stored outside; it may corrode. Keep the
drywall lift in a covered, dry place. If desired, you may disassemble the
drywall lift as described in Disassembly.
REMOVAL FROM STORAGE
1.
Inspect the drywall lift to ensure that all parts are tight and in working
order and that the drywall lift is clean and free of rust or corrosion.
2.
Assemble the drywall lift, if needed.
3.
Perform all of the Before Each Use procedures, above.