8972275
3.6V Cordless Screwdriver Gun
V4.0
6
For technical questions call 1-800-665-8685
OPERATION
1.
Insert the bit into the chuck (A) until it snaps into place.
2.
Grasp the tool firmly with both hands, align the bit with the screw and press
it firmly into the screw.
3.
Start the tool by squeezing the trigger (E). Press the forward/reverse
switch (C) all the way to the right to turn the screw forward; press the
forward/reverse switch all the way to the left to reverse the screw.
CARE & MAINTENANCE
1. Maintain the tool with care. A tool in good condition is efficient, easier to
control and will have fewer problems.
2. Inspect the tool components periodically. Repair or replace damaged or
worn components. Only use identical replacement parts when servicing.
3. Maintain the tool’s labels and name plates. These carry important information.
If unreadable or missing, contact Princess Auto Ltd. for replacements.
4. Use only mild soap and a damp cloth to clean the tool.
5. Do not allow any liquids to get inside the tool.
6. Do not immerse any part of the tool in liquid.
WARNING! Only qualified service personnel should repair the tool. An
improperly repaired tool may present a hazard to the user and/or others.
TROUBLESHOOTING
Visit a Princess Auto Ltd. location for a solution if the tool does not function
properly or parts are missing. If unable to do so, have a qualified technician
service the tool.
