V4.0
1/2 in. dr Electric Impact Wrench
8988404
Visit www.princessauto.com for more information
7
11. Before using the tool on a workpiece, test the tool by running it at the
highest Speed Rating for at least 30 seconds in a safe position. Stop
immediately if there is any abnormal vibration or wobbling. Check the tool
to determine the cause.
a.
Do not allow the tool to run without load for an extended period of
time, as this will shorten its life.
12. Never touch the tool accessory or workpiece during or immediately after use.
They may be hot and could inflict a burn injury.
13. Take work breaks to prevent the tool's motor from overheating and/or
overloading.
14. Never use a tool with a cracked or worn tool accessory. Change the tool
accessory before using it.
VIBRATION PRECAUTIONS
1.
This tool vibrates during use. Repeated or long-term exposure to vibration
may cause temporary or permanent physical injury. Take frequent breaks
when using the tool.
2.
If you feel any medical symptoms related to vibrations (such as tingling,
numbness, and white or blue fingers), seek medical attention as soon
as possible.
3.
Wear suitable gloves to reduce the effects of vibration.
4.
DO NOT use this tool before consulting a physician if one of the
following applies:
a.
Pregnant
b.
Impaired blood circulation to
the hands
c.
Past hand injuries
d.
Nervous system disorders
e.
Diabetes
f.
Raynaud's Disease
ELECTROMAGNETIC FIELDS
WARNING! Shut off the electrical tool or device and move away if you feel
faint, dizzy, nausea or shocks. Seek medical attention.
Electromagnetic Fields (EMF) can interfere with electronic devices such as
pacemakers. Anyone with a pacemaker should consult with their doctor
before working with or near a tool that generates an EMF. The following
steps can minimize the effects of electromagnetic fields.
1.
Keep the power source and any power cables as far away from the
user as practical. A minimum of 24 in. is recommended.